Electrolux dishwasher error code

i10

Water supply problem

The dishwasher is not receiving enough water or cannot detect incoming water.

Also shown on some Electrolux models as: i11 AL5 C1

Try these free fixes first

Unplug the dishwasher before opening any panel.

  1. Make sure the water supply valve under the sink is fully open.
  2. Check the inlet hose behind the dishwasher is not kinked or squashed.
  3. Check whether water pressure is normal at a nearby tap.
  4. Disconnect power for 30 to 60 seconds, then restart the programme.

Still showing i10?

If water still does not enter with the supply on, a technician should check the inlet valve or the inlet hose filter.

Water inlet valveCheck that the part matches your exact model number (usually on a sticker inside the door or on the back).Find the part
Prefer a pro?Compare quotes from local appliance repair services.Get repair quotes (soon)

Questions people ask

What does i10 mean on a Electrolux dishwasher?

i10 on a Electrolux dishwasher means: water supply problem. The dishwasher is not receiving enough water or cannot detect incoming water.

How do I fix Electrolux dishwasher error i10?

Make sure the water supply valve under the sink is fully open. Check the inlet hose behind the dishwasher is not kinked or squashed. Check whether water pressure is normal at a nearby tap. Disconnect power for 30 to 60 seconds, then restart the programme.

When should I call a repair technician?

If water still does not enter with the supply on, a technician should check the inlet valve or the inlet hose filter.

Related dishwasher codes

Samsung 4CDishwasher: Water supply problemSamsung 9EDishwasher: Not enough waterLG IEDishwasher: Not enough water fillingLG FEDishwasher: Too much water in tubBosch E14Dishwasher: Flow meter or fill problemBosch E16Dishwasher: Water filling problem

Source: Electrolux official support · Reviewed 2026-10-01