Samsung washer error code

4C

Not filling with water

The washer isn't getting enough water to start or continue the cycle.

Also shown on some Samsung models as: 4E nF 1 4C

Try these free fixes first

Unplug the washer before opening any panel.

  1. Open both water taps fully.
  2. Check that the hot and cold hoses aren't kinked or squashed behind the machine.
  3. Make sure the drain hose isn't pushed too far into the standpipe (this can siphon water out).
  4. Turn the washer off at the wall for 1 minute, then restart.

Still showing 4C?

If the code returns with good water pressure, the water inlet valve may need replacing.

Water inlet valveCheck that the part matches your exact model number (usually on a sticker inside the door or on the back).Find the part
Prefer a pro?Compare quotes from local appliance repair services.Get repair quotes (soon)

Questions people ask

What does 4C mean on a Samsung washer?

4C on a Samsung washer means: not filling with water. The washer isn't getting enough water to start or continue the cycle.

How do I fix Samsung washer error 4C?

Open both water taps fully. Check that the hot and cold hoses aren't kinked or squashed behind the machine. Make sure the drain hose isn't pushed too far into the standpipe (this can siphon water out). Turn the washer off at the wall for 1 minute, then restart.

When should I call a repair technician?

If the code returns with good water pressure, the water inlet valve may need replacing.

Related washer codes

LG IEWasher: Water inlet errorLG FEWasher: Water overfillingLG PEWasher: Water level sensor errorBosch E17Washer: Water takes too long to fillWhirlpool F8 E1Washer: Low water flowGE H2O SUPPLYWasher: Water is not entering washer

Source: Samsung official support · Reviewed 2026-10-01