Electrolux washer error code

E10

Water not filling properly

The washer is not getting enough water, or water is entering too slowly, within the expected time.

Also shown on some Electrolux models as: E11 C1

Try these free fixes first

Unplug the washer before opening any panel.

  1. Make sure the water tap feeding the washer is turned fully on and other taps in the house have normal pressure.
  2. Straighten any kinks or twists in the inlet hose and check it is not crushed behind the machine.
  3. Unplug the washer, turn off the tap, unscrew the inlet hose and rinse the small mesh filter at the connection.
  4. Check the drain hose is not pushed too far down into the standpipe, which can siphon water out as it fills.
  5. Unplug for 30 seconds, plug back in and start a new programme.

Still showing E10?

If water still does not enter with the tap fully open and clean filters, a technician should check the water inlet valve.

Water inlet valveCheck that the part matches your exact model number (usually on a sticker inside the door or on the back).Find the part
Prefer a pro?Compare quotes from local appliance repair services.Get repair quotes (soon)

Questions people ask

What does E10 mean on a Electrolux washer?

E10 on a Electrolux washer means: water not filling properly. The washer is not getting enough water, or water is entering too slowly, within the expected time.

How do I fix Electrolux washer error E10?

Make sure the water tap feeding the washer is turned fully on and other taps in the house have normal pressure. Straighten any kinks or twists in the inlet hose and check it is not crushed behind the machine. Unplug the washer, turn off the tap, unscrew the inlet hose and rinse the small mesh filter at the connection. Check the drain hose is not pushed too far down into the standpipe, which can siphon water out as it fills. Unplug for 30 seconds, plug back in and start a new programme.

When should I call a repair technician?

If water still does not enter with the tap fully open and clean filters, a technician should check the water inlet valve.

Related washer codes

Samsung 4CWasher: Not filling with waterSamsung OEWasher: Overflow / too much waterLG IEWasher: Water inlet errorLG FEWasher: Water overfillingLG PEWasher: Water level sensor errorBosch E17Washer: Water takes too long to fill

Source: Electrolux official support · Reviewed 2026-10-01