Frigidaire washer error code

E2

Water drains too slowly

The washer is not draining properly, or water is taking too long to pump out.

Try these free fixes first

Unplug the washer before opening any panel.

  1. Check that the washer's circuit breaker or fuse has not tripped.
  2. Close the lid and press Start/Pause, since the washer will not drain-spin with the lid open.
  3. Pull the washer out carefully and straighten any kinks in the drain hose.
  4. Unplug the washer, then remove the drain hose from the standpipe and clear any lint or debris blocking it.
  5. Confirm the drain hose goes into a standpipe at the height shown in your installation instructions.

Still showing E2?

If the hose and standpipe are clear but the code returns, call a technician to inspect the drain pump for a clog or failure.

Drain pumpCheck that the part matches your exact model number (usually on a sticker inside the door or on the back).Find the part
Prefer a pro?Compare quotes from local appliance repair services.Get repair quotes (soon)

Questions people ask

What does E2 mean on a Frigidaire washer?

E2 on a Frigidaire washer means: water drains too slowly. The washer is not draining properly, or water is taking too long to pump out.

How do I fix Frigidaire washer error E2?

Check that the washer's circuit breaker or fuse has not tripped. Close the lid and press Start/Pause, since the washer will not drain-spin with the lid open. Pull the washer out carefully and straighten any kinks in the drain hose. Unplug the washer, then remove the drain hose from the standpipe and clear any lint or debris blocking it. Confirm the drain hose goes into a standpipe at the height shown in your installation instructions.

When should I call a repair technician?

If the hose and standpipe are clear but the code returns, call a technician to inspect the drain pump for a clog or failure.

Related washer codes

Source: Frigidaire official support · Reviewed 2026-10-01