Samsung dishwasher error code
1E
Clogged filter or high heat
On Waterwall models water is not getting through the filter; on Rotary models the heater is running too hot.
Also shown on some Samsung models as: IE
Try these free fixes first
Unplug the dishwasher before opening any panel.
- Turn the dishwasher off and let it cool for a few minutes.
- Pull out the bottom rack, twist out the filter and rinse it under the tap with a soft brush.
- Put the filter back firmly and make sure it locks in place.
- For Rotary models, switch the breaker off for 30 seconds, then empty the dishwasher, add detergent and run a Normal cycle.
Still showing 1E?
If the code returns with a clean filter, have a technician check the heater and its temperature sensor.
Questions people ask
What does 1E mean on a Samsung dishwasher?
1E on a Samsung dishwasher means: clogged filter or high heat. On Waterwall models water is not getting through the filter; on Rotary models the heater is running too hot.
How do I fix Samsung dishwasher error 1E?
Turn the dishwasher off and let it cool for a few minutes. Pull out the bottom rack, twist out the filter and rinse it under the tap with a soft brush. Put the filter back firmly and make sure it locks in place. For Rotary models, switch the breaker off for 30 seconds, then empty the dishwasher, add detergent and run a Normal cycle.
When should I call a repair technician?
If the code returns with a clean filter, have a technician check the heater and its temperature sensor.
Related dishwasher codes
LG OEDishwasher: Dishwasher not drainingBosch E24Dishwasher: Water not draining properlyBosch E25Dishwasher: Drain pump blockedBosch E22Dishwasher: Dishwasher filter is blockedBosch E23Dishwasher: Drain pump faulty or cloggedWhirlpool F9E1Dishwasher: Long drain, not drainingSource: Samsung official support · Reviewed 2026-10-01