Electrolux washer error code

EF0

Leak, foam or unbalanced load

The washer has detected a possible water leak, too much foam, or an unbalanced load.

Also shown on some Electrolux models as: EFo EF3

Try these free fixes first

Unplug the washer before opening any panel.

  1. Use less detergent and, if there is lots of foam, leave the machine for a few hours to let it settle before restarting.
  2. Clean the detergent drawer and the area above it, removing any limescale or residue.
  3. Check for laundry trapped in the door seal and look for damage to the seal.
  4. Unplug the washer, then check the drain pump filter cap is undamaged and screwed in tightly by hand.
  5. Check both ends of the water supply hose for drips.

Still showing EF0?

If the code persists after these checks, a technician should find the leak source, often the door seal or an internal hose.

Door sealCheck that the part matches your exact model number (usually on a sticker inside the door or on the back).Find the part
Prefer a pro?Compare quotes from local appliance repair services.Get repair quotes (soon)

Questions people ask

What does EF0 mean on a Electrolux washer?

EF0 on a Electrolux washer means: leak, foam or unbalanced load. The washer has detected a possible water leak, too much foam, or an unbalanced load.

How do I fix Electrolux washer error EF0?

Use less detergent and, if there is lots of foam, leave the machine for a few hours to let it settle before restarting. Clean the detergent drawer and the area above it, removing any limescale or residue. Check for laundry trapped in the door seal and look for damage to the seal. Unplug the washer, then check the drain pump filter cap is undamaged and screwed in tightly by hand. Check both ends of the water supply hose for drips.

When should I call a repair technician?

If the code persists after these checks, a technician should find the leak source, often the door seal or an internal hose.

Related washer codes

Samsung LEWasher: Water level or leak errorLG AEWasher: Leak detectedBosch E23Washer: AquaStop activated (leak)GE FEWasher: Water at critical levelElectrolux E10Washer: Water not filling properlyElectrolux E20Washer: Washer not draining

Source: Electrolux official support · Reviewed 2026-10-01